Tank Hard

Land and riverbank north and west of Stather Road, Burton-upon-stather, Scunthorpe, Lincolnshire, DN15 9DH

Listed on the National Heritage List for England. Search over 400,000 listed places

Overview

A tank hard and apron (hardstanding) of 1944 built for military training in support of the campaign in Europe following D-Day. Constructed of concrete blocks, timber sleepers and reinforced concrete for the purpose of tank embarkation and manoeuvring. Read the official list entry to find out more.

Heritage Category:: Listed Building
Grade:: II
List Entry Number:: 1481990
Date first listed:: 20-Jan-2023
List Entry Name:: Tank Hard
Statutory Address:: Land and riverbank north and west of Stather Road, Burton-upon-stather, Scunthorpe, Lincolnshire, DN15 9DH

View of Tank Ramp and River Trent looking North. Shows experimental work using a floating mat/ called moses. — Uploaded by Stuart Burgess This photo may not represent the current condition of the site
View all

Location

Location of this list entry and nearby places that are also listed. Use our map search to find more listed places.

There is a problem

Use of this mapping is subject to terms and conditions.

This map is for quick reference purposes only and may not be to scale.

What is the National Heritage List for England?

The National Heritage List for England is a unique register of our country's most significant historic buildings and sites. The places on the list are protected by law and most are not open to the public.

The list includes:

🏠 Buildings
🏰 Scheduled monuments
🌳 Parks and gardens
⚔️ Battlefields
⚓ Shipwrecks

Find out more about listing

Historic England Archive

Search over 1 million photographs and drawings from the 1850s to the present day using our images archive.

Find Photos

Official list entry

Heritage Category:: Listed Building
Grade:: II
List Entry Number:: 1481990
Date first listed:: 20-Jan-2023
List Entry Name:: Tank Hard
Statutory Address 1:: Land and riverbank north and west of Stather Road, Burton-upon-stather, Scunthorpe, Lincolnshire, DN15 9DH

This List entry helps identify the building designated at this address for its special architectural or historic interest.

Unless the List entry states otherwise, it includes both the structure itself and any object or structure fixed to it (whether inside or outside) as well as any object or structure within the curtilage of the building.

For these purposes, to be included within the curtilage of the building, the object or structure must have formed part of the land since before 1st July 1948.

Understanding list entries

Corrections and minor amendments

This List entry helps identify the building designated at this address for its special architectural or historic interest.

For these purposes, to be included within the curtilage of the building, the object or structure must have formed part of the land since before 1st July 1948.

Understanding list entries

Corrections and minor amendments

Location

Statutory Address:: Land and riverbank north and west of Stather Road, Burton-upon-stather, Scunthorpe, Lincolnshire, DN15 9DH

The building or site itself may lie within the boundary of more than one authority.

District:: North Lincolnshire (Unitary Authority)
Parish:: Alkborough
National Grid Reference:: SE8662218968

Summary

Reasons for Designation

The Tank Hard on the River Trent bank at Burton Upon Stather, Lincolnshire is listed at Grade II for the following principal reasons:

Historic interest:

* as a physical manifestation of the ingenuity and technical expertise of the 79th Armoured Division to secretly develop new technology to help change the course of the Second World War, in this case by improving river crossing methods using Duplex Drive (DD) amphibious tanks that were crucial to the military advance into Germany; * it was the only tank hard built for training and other Second World War tank hards to survive well are nationally designated in recognition of their rarity and considerable historic interest.

Architectural interest:

* as a substantially intact tank hard and apron with iron fittings, the structure illustrates its unusual function for military training of technologically innovative equipment; * despite some degradation, it survives well as a Second World War tank hard in comparison with the few other examples that remain in England.

History

The tank hard (or tank ramp) and apron was part of the River Crossing Wing School of the 79th Armoured Division on the site from 1944-48. It was used for the secret training of squadrons in new methods of crossing of rivers using Duplex Drive (DD) amphibious tanks. This was one of three training wings set up for tackling different challenging environments, the others being A Wing, the Freshwater School based at Fritton Lake, Norfolk; and B Wing, the Saltwater School, based at Gosport, Hampshire. They were formed as part of the invasion plans agreed following the disastrous landing at Dieppe in August 1942 when the British and Canadian troops who were unloading tanks suffered heavy casualties.

The 79th Armoured Division was established in 1943 commanded by Major-General Percy Hobart under the overall command of General Sir Alan Brooke and instigated by Winston Churchill. The purpose was to devise the modification and development of a series of tanks to adapt to a variety of problems encountered during invasions, and to train specialist units to use the tanks in combat. A key innovation was made by Hungarian engineer Nicholas Straussler who developed a canvas flotation screen to make Valentine and Sherman tanks ‘amphibious’. Compressed air was used to raise the screen with a locking mechanism to hold it stiff, to provide buoyancy as the DD tanks drove off a landing craft into the sea or from a riverbank. Once developed, this enabled the Division to provide vital close firing support to troops landing on the beaches in Operation Overlord in June 1944. Another of Straussler’s inventions that was trialled at Burton-upon-Stather was ‘Gin and It’ - a folding canvas ramp that could be attached to the front of a tank or a Buffalo landing vehicle, to enable it to climb up slippery riverbanks.

The Burton site was selected in May 1944 for its similar characteristics to those of the Rivers Seine and Rhine, which would need to be crossed as part of the advance into Germany in late 1944 and 1945. It also benefited from being a secluded location where training could take place in secret. The site was requisitioned and made secure. A 130m access road from a field adjacent to Stather Road and a concrete and timber hard or tank ramp with 500 ‘chocolate blocks’, were laid out by Artesian Works Company. The chocolate blocks (also known as biscuit slabs) were used at numerous sites across the country to facilitate the entry and exit of tracked vehicles to waterways, particularly the embarkation hards established to enable landing craft to be loaded for D-Day. The school was in operation by July 1944 and other structures built there included workshops to the south of the site and a temporary summer camp for 400 men. The Staffordshire Yeomanry was the only regiment to train at Burton with further training taking place in Belgium prior to action in the Netherlands, in Operation Plunder (the Rhine) and in Italy.

Training continued at Burton after the war and new prototype equipment was tested. The site was taken out of use in 1947 and the site cleared of school camp buildings and structures. The footpath was closed to the public in the 1980s and the tank hard became silted over. The remaining camp structures were cleared in the 1990s. The tank hard was cleared of vegetation in the early C21 by a local heritage group but has since silted up again.

Details

A tank hard with apron constructed in June 1944 by Artesian Works Company for the 79th Armoured Division.

MATERIALS: constructed of cast concrete and concrete panels with some iron fittings, iron beams and timber sleepers.

DESCRIPTION: the apron platform of level concrete at the top of the riverbank is parallel to the river (north/south) and forms a hardstanding. It is built of two adjoining sections, one measuring 31m x 3m and the other measuring 31m x 3.1m. There are two 7.3m iron railway beams set in the front edge, 6m apart. Set in the concrete at the south end of each beam are 7 equally spaced iron bars arranged radially to form a quadrant to aid the traction of tank vehicles and prevent damage to the concrete during a turning manoeuvre. To the rear of the hardstanding are two approximately 1.3m square sunken anchor blocks with iron loops and rings for mooring landing craft or hauling of heavy equipment, vehicles.

A second concrete tank hard slopes down to the river from the iron beams at a 15-degree angle. It is understood that it measures 2m from front to back and is 20.5m wide in two sections. Damage to each end indicates that it was originally wider and possibly of 31m to match the sections on land. Below this platform are approximately 175 railways sleepers laid at right angles to it, although several of the sleepers above low water mark are thought to have been lost to decay. The recorded arrangement of sleepers is 43 across the width of the ramp and four or five from top to bottom. The sleepers are bedded on concrete ‘chocolate blocks’, fixed with screws and rods, and are 0.3m wide and 0.15m deep, and a variety of lengths. Below the sleepers is another concrete platform of unknown dimensions.

Sources

Books and journals
Fletcher, D, Swimming Shermans: Sherman DD amphibious tank of World War II, (2006)
Fletcher, D, Vanguard of Victory: The 79th Armoured Division, (1984)
Websites
Burton Upon Stather Heritage Group: The Tank Ramp, accessed 10/08/2022 from http://burtonstatherheritage.org/tank-ramp/
The Duplex Drive Tanks of D Day: River Crossing Wing, Burton-Upon-Stather, accessed 10/08/22 from http://www.duplexdrivetanks.co.uk/DUPLEXPAGES/RIVER1.html

Legal

This building is listed under the Planning (Listed Buildings and Conservation Areas) Act 1990 as amended for its special architectural or historic interest.

The listed building(s) is/are shown coloured blue on the attached map. Pursuant to s1 (5A) of the Planning (Listed Buildings and Conservation Areas) Act 1990 (‘the Act’) structures attached to or within the curtilage of the listed building but not coloured blue on the map, are not to be treated as part of the listed building for the purposes of the Act. However, any works to these structures which have the potential to affect the character of the listed building as a building of special architectural or historic interest may still require Listed Building Consent (LBC) and this is a matter for the Local Planning Authority (LPA) to determine.