Victoria Bridge

Reasons for Designation

The Victoria Bridge of 1887 has been designated at Grade II for the following principal reasons:

* It has significant constructional interest as an increasingly rare survival of a C19 wrought iron arched bridge with a balustrade of cast iron

* It displays a high level of architectural quality in its overall design, detailing and use of materials

* It compares favourably with other listed bridges of similar construction and date, such as Battersea Bridge, London (Grade II)

Details

THORNABY

396/0/10031 A1130 19-FEB-10 VICTORIA BRIDGE

II Bridge, 1887, by Charles Neate; the consulting engineer was Mr Harrison Haytor and the builders were Messrs Whitaker Brothers of Leeds.

MATERIALS: wrought iron, cast iron Bramley Fall stone and granite.

DESCRIPTION: Victoria Bridge, Stockton has three river spans with a central span of 33.5m and two side spans of 18.2m, also two land arches 3.7m wide, and achieves a total length of c.104m. Each span is formed of eight ribs connected together by seven sets of transverse radial bracing, the spandrels also being connected together by six sets of diagonal bracing. Each rib at the springing works on a cast-iron knuckle joint. The spandrels are embellished with open ironwork of diminishing interlocking circles incorporating various coats of arms. Buckled plates, riveted upon the ribs and spandrels carry the causeway which is supported by decorative scrolled brackets. The carriageway is 12m wide, flanked by footpaths 3m wide; each footpath has the provision to carry a water main beneath its surface.The abutments and piers are of Bramley Fall stone faced with ashlar. The balustrade is of open cast iron work of an interlocking circle design, which incorporates classical granite parapets which rise above each of the five bridge piers. The parapets carry original ornate cast-iron lamp posts with modern lamps.

HISTORY: The bridge was opened in 1887 to commemorate the Golden Jubilee of Queen Victoria and replaced an earlier bridge of 1771. It was designed by Messrs H Haytor and Charles Neate and was built by Whitaker Brothers, Leeds at a cost of £69051. The money was raised by local councils with contributions from the Tramway Company, North Eastern Railway and the Water Board. The bridge was used by trams until 1931 when it became a road bridge.

SOURCES: Neate, Charles, Memoir of the Victoria Bridge, Stockton-on-Tees min. proc. Instn. Civ. Engrs. (1892) 304-1 Rennison, R W, Civil Engineering Heritage: Northern England: Victoria Bridge (1996) 93

REASONS FOR DESIGNATION: The Victoria Bridge of 1887 is designated at Grade II for the following principal reasons:

* It has significant constructional interest as an increasingly rare survival of a C19 wrought iron arched bridge with a balustrade of cast iron

* It displays a high level of architectural quality in its overall design, detailing and use of materials

* It compares favourably with other listed bridges of similar construction and date, such as Battersea Bridge, London (Grade II)

Legacy

The contents of this record have been generated from a legacy data system.

Legacy System number:

506706

Legacy System:

LBS

End of official list entry

All text content is available under the Open Government Licence v3.0 , except where otherwise stated. Any supplied maps are © Crown Copyright [and database rights] 2026 OS AC0000815036 and may not be reproduced without permission.